>You are here: Home > Case Studies
Shanghai Wanggang substation is a 220kV substation located at Pudong district, Shanghai. The substation is managed by Zhangqiao dispatching center. The substation has two (2) 180,000 kVA transformers, four (4) incoming supply lines of 220kV and nineteen (19) outgoing feeders of 35 kV.


The existing interlocking system deployed in the Shanghai Wanggang substation is an offline system, the Smart Key is unaware of the primary equipment status changes during the operation. Without real-time communication between Smart Key and Smart Interlock System host, the interlocking system can only enforce a series of predefined orders without validating each step. Meanwhile a single operation can only be stored in a single Smart Key. Operators are required to travel back and forth between control room and the field frequently for a complicated switching task. All these shortcomings greatly constrained switching operation efficiency.


Unitech JOYO series Smart Interlock System achieves the following benefits:

■ Real-time status update on Smart Interlock System Host
■ Real-time validation and authorization before each switching steps
■ Unique operation privilege enforcement
■ Video monitoring of primary equipment during operation
■ Reduced operation workload and training cost


JOYO-B43 Smart Interlock System was the answer to above challenges. JOYO series smart interlock system features a five step process that incorporate simulation before switching and step by step validation.

Step 1: Simulation

Operation orders are simulated on SIS Host to verify its correctness. SIS host consists of a rule database and one line diagram of primary equipment that will facilitate the simulation, thus prohibits any faulty switching operation.

Step 2: Transmission

Once the operation procedure is validated on SIS host, the electronic switching order will be generated and transmitted to the Smart Key. There are two types of communication methods supported between Smart Key and SIS host, wired bus connection and low power consumption wireless communication. The operator is ready for field work once the transmission is finished.

Step 3: Device Verification

By following the instruction showed on Smart Key, the field operator can easily locate designated devices. Before any actual operation, the device must be identified by the Smart Key. In order to achieve universal identification, RFID is embedded in locking mechanism of each device.

Step 4: Operation Validation

Instead of following a predefined procedure, once the device is verified, the Smart Key will send a request to SIS host to validate the operation. SIS host will make the decision based on real-time equipment status, which is much safer than assuming the system will preserve previous status. Also, the SIS host will ensure only one operator can request operation on a particular equipment at any given time.

Step 5: Switching

Once the switching operation takes place, SIS host will be aware of any primary equipment status change directly through acknowledgement from Smart Key or indirectly from SCADA/EMS system.

Contact Us
For international sales contact:
正版棋牌游戏下载 j8彩票平台 亿客隆网址 (^ω^)MG轩辕帝传怎么玩容易爆分 福彩20选5号码的产生 3d水果老虎机 亿客隆 六合图库彩图天机报 (-^O^-)MG幸运生肖闯关 (★^O^★)MG埃及旋转援彩金 6场半全场开奖历史记录 (^ω^)MG黑绵羊咩咩叫免费下载 (*^▽^*)MG凯蒂卡巴拉投注 (*^▽^*)MG幸运月游戏规则 (★^O^★)MG亚洲幻想app 内蒙古快三遗漏一定牛 (*^▽^*)MG酷犬酒店官网